View DG406BDN-T1-E3_3420088.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vishay siliconix dg406b, dg407b document number: 72552 s11-0179-rev. c, 07-feb-11 www.vishay.com 1 16-ch/dual 8-ch high-performance cmos analog multiplexers features ? low on-resistance - r ds(on) : 45 ? ? low charge injection - q: 11 pc ? fast transition time - t trans : 115 ns ? low oower: 0.2 mw ? single supply capability benefits ? higher accuracy ? reduced glitching ? improved data throughput ? reduced power consumption ? increased ruggedness ? wide supply ranges: 5 v to 20 v applications ? data acquisition systems ? audio signal routing ? medical instrumentation ? ate systems ? battery powered systems ? high-rel systems ? single supply systems description the dg406b is a 16-channel single-ended analog multiplexer designed to connect one of sixteen inputs to a common output as determined by a 4-bit binary address. the dg407b selects one of eight differential inputs to a common differential output. break-before-make switching action protects against moment ary shorting of inputs. an on channel conducts current equally well in both directions. in the off state each channel blocks voltages up to the power supply rails. an enable (en) function allows the user to reset the multiplexer/dem ultiplexer to all switches off for stacking several devices. all control inputs, address (a x ) and enable (en) are ttl compatible over the full specified operating temperature range. applications for the dg406b, dg407b include high speed data acquisition, audio signal switching and routing, ate systems, and avionics. high performance and low power dissipation make them ideal for battery operated and remote instrumentation applications. designed in the 44 v silicon-gate cmos process, the absolute maximum voltage rating is extended to 44 volts, allowing operation with 20 v supplies. additionally single (12 v) supply operation is allowed. an epitaxial layer prevents latchup. functional block diagram and pin configuration * pb containing terminations are not rohs compliant, exemptions may apply v+ s 11 s 10 s 9 nc a 3 d s 2 s 1 gnd a 1 a 2 nc dual-in-line and soic wide-body a 0 en v- nc s 8 s 16 s 7 s 15 s 6 s 14 s 5 s 13 s 4 s 12 s 3 1 2 3 4 5 6 7 8 28 27 26 25 24 23 22 21 top view 920 10 19 11 12 18 17 13 16 14 15 dg406b decoders/drivers dg407b v+ s 3b s 2b s 1b nc nc d a s 2a s 1a gnd a 1 a 2 d b dual-in-line and soic wide-body a 0 en v- nc s 8a s 8b s 7a s 7b s 6a s 6b s 5a s 5b s 4a s 4b s 3a 1 2 3 4 5 6 7 8 28 27 26 25 24 23 22 21 top view 920 10 19 11 12 18 17 13 16 14 15 decoders/drivers
www.vishay.com 2 document number: 72552 s11-0179-rev. c, 07-feb-11 vishay siliconix dg406b, dg407b functional block diagram and pin configuration logic ?0? = v al ?? 0.8 v logic ?1? = v ah ?? 2.4 v x = do not care decoders/drivers plcc and lcc 7 8 9 5 20 19 21 22 23 24 25 1 2 3 4 10 11 12 13 14 15 16 17 18 26 27 28 top view 6 s 13 s 15 s 5 s 12 s 4 s 7 s 11 s 14 s 6 s 3 s 10 s 2 s 9 s 1 s gnd nc nc nc 3 v+ 2 d 1 v- 0 s en dg406b a a a a 16 8 s 7b s 5a s 4b s 4a s 7a s 3b s 6b s 6a s 3a s 5b s 2b s 2a s 1b s 1a plcc and lcc top view gnd nc nc d nc v+ d v- en s 2 1 0 s a a a 8b 8a b a dg407b decoders/drivers 7 8 9 5 20 19 21 22 23 24 25 1 2 3 4 10 11 12 13 14 15 16 17 18 26 27 28 6 truth table (dg406b) a 3 a 2 a 1 a 0 en on switch x x x x 0 none 0 0 0 0 1 1 0 0 0 1 1 2 0 0 1 0 1 3 0 0 1 1 1 4 0 1 0 0 1 5 0 1 0 1 1 6 0 1 1 0 1 7 0 1 1 1 1 8 1 0 0 0 1 9 1 0 0 1 1 10 1 0 1 0 1 11 1 0 1 1 1 12 1 1 0 0 1 13 1 1 0 1 1 14 1 1 1 0 1 15 1 1 1 1 1 16 truth table (dg407b) a 2 a 1 a 0 en on switch pair x x x 0 none 0 0 0 1 1 0 0 1 1 2 0 1 0 1 3 0 1 1 1 4 1 0 0 1 5 1 0 1 1 6 1 1 0 1 7 1 1 1 1 8 ordering information (dg406b) temp. range package part number - 40 c to 85 c 28-pin plastic dip dg406bdj dg406bdj-e3 28-pin plcc dg406bdn DG406BDN-T1-E3 28-pin widebody soic dg406bdw dg406bdw-e3 ordering information (dg407b) temp. range package part number - 40 c to 85 c 28-pin plastic dip dg407bdj dg407bdj-e3 28-pin plcc dg407bdn dg407bdn-t1-e3 28-pin widebody soic dg407bdw dg407bdw-e3
document number: 72552 s11-0179-rev. c, 07-feb-11 www.vishay.com 3 vishay siliconix dg406b, dg407b notes: a. signals on s x , d x or in x exceeding v+ or v- will be clamped by internal diodes. limit forward di ode current to maximum current ratings. b. all leads soldered or welded to pc board. c. derate 8.3 mw/c above 75 c. d. derate 16 mw/c above 75 c. e. derate 18 mw/c above 75 c. f. derate 6 mw/c above 75 c. absolute maximum ratings parameter limit unit voltages referenced to v- v+ 44 v gnd 25 digital inputs a , v s , v d (v-) - 2 to (v+) + 2 or 20 ma, whichever occurs first current (any terminal) 30 ma peak current, s or d (pulsed at 1 ms, 10 % duty cycle max.) 100 storage temperature - 65 to 150 c power dissipation (package) b 28-pin plastic dip c 625 mw 28-pin cerdip d 1.2 w 28-pin plastic plcc c 450 mw lcc-28 e 1.35 w 28-pin widebody soic f 450 mw
www.vishay.com 4 document number: 72552 s11-0179-rev. c, 07-feb-11 vishay siliconix dg406b, dg407b specifications parameter symbol test conditions unless otherwise specified v+ = 15 v, v- = - 15 v v al = 0.8 v, v ah = 2.4 v f temp. b typ. c a suffix - 55 c to 125 c d suffix - 40 c to 85 c unit min. d max. d min. d max. d analog switch analog signal range e v analog full - 15 15 - 15 15 v drain-source on-resistance r ds(on) v d = 10 v, i s = - 10 ma sequence each switch on room full 45 60 87 60 74 ? r ds(on) matching between channels g ? r ds(on) v d = 10 v room 5 % source off leakage current i s(off) v en = 0 v v d = 10 v v s = 10 v room full - 0.5 - 50 0.5 50 - 0.5 - 5 0.5 5 na drain off leakage current i d(off) dg406b room full - 1 - 200 1 200 - 1 - 40 1 40 dg407b room full - 1 - 100 1 100 - 1 - 20 1 20 drain on leakage current i d(on) v s = v d = 10 sequence each switch on dg406b room full - 1 - 200 1 200 - 1 - 40 1 40 dg407b room full - 1 - 100 1 100 - 1 - 20 1 20 digital control logic high input voltage v inh full 2.4 2.4 v logic low input voltage v inl full 0.8 0.8 logic high input current i ah v a = 2.4 v, 15 v full - 1 1 - 1 1 a logic low input current i al v en = 0 v, 2.4 v, v a = 0 v full - 1 1 - 1 1 logic input capacitance c in f = 1 mhz room 6 pf dynamic characteristics transition time t trans see figure 2 room full 115 148 170 148 161 ns break-before-make interval t open see figure 4 room full 39 10 29 10 21 enable turn-on time t on(en) see figure 3 room full 75 107 134 107 123 enable turn-off time t off(en) room full 50 88 98 88 94 charge injection q c l = 1 nf, v s = 0 v, r s = 0 ? room 11 pc off isolation h oirr v en = 0 v, r l = 50 ? f = 1 mhz room - 86 db source off capacitance c s(off) v en = 0 v, v s = 0 v, f = 1 mhz room 6 pf drain off capacitance c d(off) v en = 0 v v d = 0 v f = 1 mhz room 108 dg407b room 54 drain on capacitance c d(on) dg406b room 114 dg407b room 57 power supplies positive supply current i+ v en = v a = 0 or 5 v room full 23 30 75 30 75 a negative supply current i- room full - 0.02 - 1 - 10 - 1 - 10 positive supply current i+ v en = 2.4 v, v a = 0 v room full 28 500 900 500 700 negative supply current i- room full - 0.01 - 20 - 20 - 20 - 20
document number: 72552 s11-0179-rev. c, 07-feb-11 www.vishay.com 5 vishay siliconix dg406b, dg407b notes: a. guaranteed by 15 v leakage test, not production tested. b. room = 25 c, full = as determined by the operating temperature suffix. c. typical values are for design aid only, not guaranteed nor subject to production testing. d. the algebraic convention whereby the most negative value is a minimum and the most pos itive a maximum, is used in this data sheet. e. guaranteed by design, no t subject to production test. f. v in = input voltage to perform proper function. g. ? r ds(on) = r ds(on) max. - r ds(on) min. h. worst case isolation occurs on channel 4 due to proximity to the drain pin. stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those indi cated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended per iods may affect device reliability. specifications for single supply parameter symbol test conditions unless otherwise specified v+ = 12 v, v- = 0 v v al = 0.8 v, v ah = 2.4 v f temp. b typ. c a suffix - 55 c to 125 c d suffix - 40 c to 85 c unit min. d max. d min. d max. d analog switch analog signal range e v analog full 0 12 0 12 v drain-source on-resistance r ds(on) v d = 3 v, i s = - 1 ma sequence each switch on room 78 100 100 ? r ds(on) matching between channels g ? r ds(on) room 5 % source off leakage current a i s(off) v en = 0 v v d = 10 v or 0.5 v v s = 0.5 v or 10 v room - 0.5 0.5 - 0.5 0.5 na drain off leakage current a i d(off) dg406b room - 1 1 - 1 1 dg407b room - 1 1 - 1 1 drain on leakage current a i d(on) v s = v d = 10 v sequence each switch on dg406b room - 1 1 - 1 1 dg407b room - 1 1 - 1 1 dynamic characteristics switching time of multiplexer t trans v s1 = 8 v, v s8 = 0 v, v in = 2.4 v room 130 163 163 ns enable turn-on time t on(en) v inh = 2.4 v, v inl = 0 v v s1 = 5 v room 93 125 125 enable turn-off time t off(en) room 63 94 94 charge injection q c l = 1 nf, v s = 6 v, r s = 0 room 9 pc power supplies positive supply current i+ v en = 0 v or 5 v, v a = 0 v or 5 v room full 13 30 75 30 75 a negative supply current i- room full - 0.01 - 20 - 20 - 20 - 20
www.vishay.com 6 document number: 72552 s11-0179-rev. c, 07-feb-11 vishay siliconix dg406b, dg407b typical characteristics (t a = 25 c, unless otherwise noted) on-resistance vs. v d and dual supply voltage on-resistance vs. v d and temperature leakage vs. analog voltage 5 25 45 65 85 105 125 - 20 - 15 - 10 - 5 0 5 1 0 1 5 2 0 r ds ( on) - drain-source on-resistance ( ) v d - drain voltage (v) t a = 25 c 5 v 8 v 10 v 12 v 15 v 20 v 5 15 25 35 45 55 65 75 85 - 1 5 - 10 - 5 0 5 10 15 - 55 c v = 15 v 25 c r ds(on) - drain-source on-resistance ( ) v d - drain voltage (v) 125 c 85 c - 200 - 150 - 100 - 5 0 0 50 100 150 200 - 1 5 - 10 - 5 0 5 10 15 v d or v s - drain or source v oltage (v) i d( of f) v - = - 15 v t a = 25 c i d , i s (pa) i d( on) i s( o f f ) on-resistance vs. v d and unipolar supply voltage on-resistance vs. v d and temperature leakage vs. current 0 50 100 150 200 250 300 350 0 2 4 6 8 10 12 14 16 18 20 22 v+ = 5.0 v t a = 25 c r ds(on) - drain-source on-resistance ( ) v d - drain v oltage (v) v+ = 12 v v+ = 15 v v+ = 20 v v+ = 10 v v+ = 22 v 5 25 45 65 85 105 125 145 02468 1 0 12 - 55 c 25 c r ds(on) - drain-source on-resistance ( ) v d - drain voltage (v) 125 c v+ = 12 v v- = 0 v 85 c - 80 - 60 - 40 - 20 0 20 40 60 80 100 120 140 1 1000 10000 temperature (c) 10 100 leakage (pa) i d(off) i d(on) i s(off) v = 15 v
document number: 72552 s11-0179-rev. c, 07-feb-11 www.vishay.com 7 vishay siliconix dg406b, dg407b typical characteristics (t a = 25 c, unless otherwise noted) supply current vs. input switching frequency switching time vs. single supplies insertion loss, off -isolation crosstalk vs. frequency input switching frequency (hz) 10 100 1 k 10 k 100 k 1 m 10 m 100 p 10 n 100 n 1 m 100 m 1 10 100 supply current (na) i+ - 10 m 1 n v = 15 v i+ i- 25 50 75 100 125 150 175 200 225 250 275 300 5 101520 t on(en) supply voltage (v) t trans t off(en) time (ns) - 10 talk 100 k - 110 1 m - 30 10 - 70 - 50 100 m 1 g frequency (hz) - 90 loss 10 m loss, oirr, x (db) oirr x ta l k v+ = 15 v v - = - 15 v r l = 50 switching time vs. bipolar supplies switching threshold vs. supply voltage charge injection vs. analog voltage 25 50 75 100 125 150 175 200 t on(en) supply voltage (v) t trans t off(en) time (ns) 5 10 15 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 5 1015202530 - switching threshold (v) v+ - supply voltage (v) v t - 3 5 - 3 0 - 2 5 - 2 0 - 1 5 - 1 0 - 5 0 5 10 15 20 25 30 35 - 1 5 - 12 - 9 - 6 - 3 0 3 6 9 1 2 1 5 v s - analog voltage (v) q - charge injection (pc) v = 15 v v+ = 12 v c = 1 nf v = 5 v
www.vishay.com 8 document number: 72552 s11-0179-rev. c, 07-feb-11 vishay siliconix dg406b, dg407b typical characteristics (t a = 25 c, unless otherwise noted) schematic diagram (typical channel) switching time vs. temperature 25 50 75 100 125 150 175 200 - 55 - 35 - 15 5 25 45 65 85 105 125 temperature (c) t on v = 15 v t off v = 15 v time (ns) t trans v = 15 v figure 1. en a 0 gnd s 1 v+ d v+ s n v- decode/ drive level shift v- v+ v ref a x
document number: 72552 s11-0179-rev. c, 07-feb-11 www.vishay.com 9 vishay siliconix dg406b, dg407b test circuits figure 2. transition time logic input switch output v s8 v o t trans t r < 5 ns t f < 5 ns s 8 on s 1 on t trans 0 v v s1 50 % 90 % 90 % 3 v 0 v dg406b s 1b s 8b a 2 d b a 1 * a 0 * = s 1a ? s 8a , s 2b - s 7b , d a 50 300 v o 10 v 10 v + 2.4 v + 15 v - 15 v en v+ v- gnd 35 pf s 1 s 2 - s 15 s 16 a 2 a 1 a 0 50 300 v o a 3 10 v 10 v + 2.4 v + 15 v - 15 v en v+ v- gnd d 35 pf dg407b figure 3. enable switching time v o t r < 5 ns t f < 5 ns v o logic input t on(en) 90 % switch output 50 % t off(en) 3 v 0 v 0 v a 1 50 a 0 s 1 v o a 2 - 5 v + 15 v - 15 v 300 en s 2 - s 16 v+ v- gnd d 35 pf a 3 v o s 1b a 2 s 1a - s 8a s 2b - s 8b a 1 d a and d b a 0 50 300 + 15 v - 15 v en v+ v- gnd 35 pf dg406b dg407b - 5 v 90 %
www.vishay.com 10 document number: 72552 s11-0179-rev. c, 07-feb-11 vishay siliconix dg406b, dg407b test circuits vishay siliconix maintains worldwide manufacturing capability. products may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?72552 . figure 4. break-before-make interval 50 % 80 % logic input switch output v o v s t open t r < 5 ns t f < 5 ns 0 v 3 v 0 v 50 a 0 all s and d a 300 a 3 d,d b a 1 a 2 + 2.4 v + 15 v - 15 v en v+ v- v o gnd + 5 v 35 pf dg406b dg407b
e 1 e q 1 a l a(1) e 1 b b 1 s c e a l a 1 d 15 max. 1234567891011121314 28 27 26 25 24 23 22 21 20 19 18 17 16 15 package information vishay siliconix document number: 71243 06-jul-01 www.vishay.com 1

dim min max min max 2.29 5.08 0.090 0.200 0.39 1.77 0.015 0.070 0.38 0.56 0.015 0.022 0.89 1.65 0.035 0.065 0.204 0.30 0.008 0.012 35.10 39.70 1.380 1.565
15.24 15.88 0.600 0.625
13.21 14.73 0.520 0.580 2.29 2.79 0.090 0.110 14.99 15.49 0.590 0.610 2.60 5.08 0.100 0.200 0.95 2.345 0.0375 0.0925 0.995 2.665 0.0375 0.105 ecn: s-03946?rev. f, 09-jul-01 dwg: 5488
document number: 71264 www.vishay.com 28-sep-09 1 package information vishay siliconix plcc: 28-lead d 0.101 mm 0.004" d-square d 1 -square b b 1 e 1 a 1 a a 2 d 2 dim. millimeters inches min. max. min. max. a 4.20 4.57 0.165 0.180 a 1 2.29 3.04 0.090 0.120 a 2 0.51 - 0.020 - b 0.331 0.553 0.013 0.021 b 1 0.661 0.812 0.026 0.032 d 12.32 12.57 0.485 0.495 d 1 11.430 11.582 0.450 0.456 d 2 9.91 10.92 0.390 0.430 e 1 1.27 bsc 0.050 bsc ecn: t09-0766-rev. d, 28-sep-09 dwg: 5491
package information www.vishay.com vishay siliconix revision: 01-aug-11 1 document number: 71268 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 soic (wide-body): 28-leads ecn: e11-2209-rev. d, 01-aug-11 dwg: 5850 0.3525 0.001 0.06 0.002d cavity no. 0.295 0.001 0.070 0.005 0.1475 0.001 0.055 0.005 pin 1 indicator 0.047 0.007 0.001 dp surface polished 0.010 0.334 0.005 r0.004 r0.008 r0.009 r0.004 0.032 0.005 4 2 0.041 0.001 0.705 0.001 0.091 0.001 0.017 0.0003 0.050 typ. 0.00825 0.00325 0.098 0.002 0.334 0.005 0.291 0.001 0.295 0.001 0.406 0.004 r0.004 7 (4 ) 0.020 45 detail a detail a 1 2345678 28 27 26 25 24 23 22 21 910 20 19 11 18 12 17 13 16 14 15 all dimensions in inches
d l 1 e b l e a 1 a 28 1 2 package information vishay siliconix document number: 71278 02-jul-01 www.vishay.com 1

dim min max min max 1.37 2.24 0.054 0.088 1.63 2.54 0.064 0.100 0.56 0.71 0.022 0.028 11.23 11.63 0.442 0.458 11.23 11.63 0.442 0.458 1.27 bsc 0.050 bsc 1.14 1.40 0.045 0.055 1.96 2.36 0.077 0.093 ecn: s-03946?rev. b, 09-jul-01 dwg: 5319
e 1 e q 1 a l a 1 e 1 b b 1 l 1 s c e a d 12 3 28 package information vishay siliconix document number: 71283 03-jul-01 www.vishay.com 1
dim min max min max a 4.06 5.92 0.160 0.232 a 1 0.38 1.52 0.015 0.060 b 0.38 0.51 0.015 0.020 b 1 1.14 1.65 0.045 0.065 c 0.20 0.30 0.008 0.012 d 36.58 37.08 1.440 1.460 e 15.24 15.88 0.600 0.625 e 1 12.95 13.46 0.510 0.530 e 1 2.54 bsc 0.100 bsc e a 15.24 bsc 0.600 bsc l 3.18 3.81 0.125 0.150 l 1 3.81 5.08 0.150 0.200 q 1 1.27 2.16 0.050 0.085 s 1.52 2.29 0.060 0.090 0 15 0 15 ecn: s-03946?rev. e, 09-jul-01 dwg: 5434
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of DG406BDN-T1-E3

	To Download DG406BDN-T1-E3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .